sql

Cheap Iron Steel Elbow Angle

Rp. 123
Last Updated
19 Nov 2021
Minimum Order
1 Kilogram
Subcategory
Steel

Specification of Cheap Iron Steel Elbow Angle

Angle iron, also known as Steel Angle, is the most basic type of roll-formed steel. They are formed by bending one corner in a piece of steel. 'L' shaped Angle Steel; The most common types of Angle Steel are at an angle of 90 degrees. The "L" legs may or may not be the same length. Steel angles are used for various purposes in a number of industries. Framing is one of the most common uses for steel corners, but steel corners are also used for brackets, trim, reinforcements, and many other uses. The larger the angle of the steel, the more weight and stress it can bear.

Generally large angle steel is used for side lengths of more than 12.5cm, medium angle steel is used for side lengths of 12.5cm-5cm, and small angle steel is used for side lengths of less than 5cm.

The delivery length of the angle steel can be divided into fixed length and double length. Domestic fixed length angle steel selection range can be 3-9m, 4-12m, 4-19m and 6-19m according to the specification number.

Angle steel type

1. Equilateral Angle Steel

For the first type of iron elbow is an equilateral elbow. As the name implies, this elbow profile steel has the same length on the sides. For example, the size of an equilateral angle iron is 40 mm x 40 mm or 4cm x 4cm, which means that both sides have a length of 2 cm. The length per stem is 6 cm.

2. Perforated Angle Steel

The next type of elbow iron is hollow elbow profile steel. This is because on the side it has a hole with its own function. The hole is usually used as a place for adhesive bolts, so that when installed it can be connected to other materials. For example, angled steel profiles are used for making minimarket shelves or bookshelves.

3. Unequal Angle Steel

And the last one is unequal angle profile steel. As the name suggests, this type of angle iron has different side lengths. For example, the size of the angle iron is not isosceles is 100 mm x 75 mm, 125 × 75 and 150 × 90.


PT. DELI BAJA ADI ANANTA
General Contruction, Mekanikal, Sipil, Fabrikasi & Supplier Besi Baja

Lokasi : Jl. Laboraturium No. 3D Kec. Medan Barat, Medan-Sumatera Utara, Indonesia
Phone : 081396709113 | 082275550202 | 081260895488

Lihat Selengkapnya

Untuk keterangan lebih lanjut, silahkan download PDF ini :

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Request a Quote
Produk Siap di Pesan
Rp 0
1